TransTEC F7 HD


216,00 lei

În stoc

Convertor monedă

Acestea sunt estimări cu scop informativ. Produsele sunt în continuare vândute în LEI.


F7 Flight Controller for DJI HD Vtx System



  • MCU : 216MHz STM32F722RET6
  • IMU : MPU6000 Low noise power filter
  • Anti-Vibration silicone grommets built in
  • 4x Uarts(1,2,4,5) with built-in SBUS inversion
  • 4x Dshot/Proshot/Oneshot outputs(Support Bidshot)
  • 1x JST-SH 1.0_8pin connector (G/Vbat/S1/S2/S3/S4/Current/R4)
  • 1x GH_1.25_6pin connector for DJI HD Vtx
  • Vbat filtered output powerfor VTX(12V for DJI HD system)
  • WS2812 Led Strip support (5V output)
  • Backup solder pads for ESC and Vtx
  • Input : 6~30V (2~6S LiPo)
  • BEC : 5V 2A cont. (Max.3A)
  • BEC : 12V 1.5A cont.
  • USB Type-C connector

USB-C connector socket.

Dji Air unit One-Cable socket.

Back-up solder pads for ESC and Air unit.

Software/Hardware Features

  • Betaflight support– Target TransTEC F7
  • BLHeli passthrough flashing supported by hardware


  • High Quality, gold plated 1.6mm thick PCB
  • Type-C USB connector for setting
  • Dimensions : 30.5×30.5mm
  • Mounting Holes : M3
  • Weight : 6g


  • 1x TransTEC F7 HD version Flight Controller
  • 5x Anti-vibration silicone grommets (for M3 sized screws)
  • 2x DJI Air unit cable(short/long)
  • 2x ESC cable(contain 6/8/10 pin socket)
  • 1x USB-C dust plug